Stainless Steel Tube Specifications
| Parameter |
Details |
| Material Grades |
304/304L/316L/321/310S/2205 |
| Diameter Range |
1mm-100mm (±0.1%-0.3% tolerance) |
| Surface Finish |
2B (120 Mesh) |
| Processing Services |
Bending, Welding, Cutting |
| Certification |
ASTM Standard |
How to Clean Stainless Steel Exhaust Pipes
For stainless steel exhaust pipes maintenance:
- Use alkaline-based cleaners (pH 9-11) for routine cleaning
- Apply 10% nitric acid + 2% citric acid solution to remove heat discoloration
- Always rinse with deionized water after chemical treatment
How to Cut Stainless Steel Pipe
Recommended methods for cutting stainless steel pipe:
- Abrasive cutting wheels (0.5-3mm thickness)
- Plasma cutting (best for pipes >100mm diameter)
- Laser cutting (±0.1mm precision)
Critical Tip: Maintain cutting speed below 25m/min to prevent overheating
MIG Welding Stainless Steel Exhaust Pipe
Optimal parameters for MIG welding:
| Wire Type |
Gas Mix |
Voltage |
Travel Speed |
| ER308L |
98% Ar + 2% O₂ |
22-28V |
30-50 cm/min |
| ER316L |
90% He + 7.5% Ar |
24-30V |
25-45 cm/min |
View full details
